Extension-4 sensor bar for calculating heat stress monitor

Extension-4 sensor bar for calculating heat stress monitor
Extension-4 sensor bar for calculating heat stress monitorExtension-4 sensor bar for calculating heat stress monitorExtension-4 sensor bar for calculating heat stress monitorExtension-4 sensor bar for calculating heat stress monitorExtension-4 sensor bar for calculating heat stress monitor
Code: 495

Brand: CrifferModel:Extension-4 Reference: Extension-4

 

 

Extension-4

Extension-4 is a sensor bar for calculating WBGT index. It must be used to determine which region of the body is most affected during working hours. In conjunction with the Protemp-4 Heat Stress Monitor, Extension-4 can be connected in series with up to 4 units at different heights such as chest, abdomen and legs to determine the region of the body most affected or horizontally by drawing a measurement perimeter.

 

Standards

ISO 7243 Ergonomics of the thermal environment — Assessment of heat stress using the WBGT (wet bulb globe temperature) index

INSHT NTP 322: Valoración del riesgo de estrés térmico: índice WBGT

 

*All Pictures shown are for illustrative purposes only. Extension-4 must be used in conjunction with Protemp-4 by purchasing it separately.

 

Technical Information

Range: -20 to 150 °C

Accuracy: ± 0.5 °C

Resolution: 0,1 °C

Operation temperature: 0 a 65 °C

Operation humidity: up to 95%

Temperature reading: Celsius or Fahrenheit

Reports in lists and graphs

Data logging intervals: 1 to 60s

High resistance to EMI/RFI

Dimensions: 180 x 46 x 47 mm

Weight: 210g

 

Carrying case
USB cable
6 inches globe
Tripod
Bottle with distilled water for wet bulb (250 ml)
Cotton wick for wet bulb

Leave your comment here







- Max of 512 caracteres.

Click to Rate


  • Rate:
Send
Login and leave your comment

Features



     

    We guarantee our customers, for the period of 3 (three) years after the issuance of the invoice, technical assistance services for any defects caused by manufacturing or component failure that makes them inappropriate for the use they are intended.

     

    To validate the guarantee, it is necessary to send the instrument properly packed, including a copy of the invoice to: Av. Theodomiro Porto da Fonseca, 3101 / Unit 6, São Leopoldo / RS CEP: 93022-715 OR TO AN AUTHORIZED DISTRIBUTOR..

     

    The period for repairing of the product will not exceed 10 working days, counted from the date of receipt in our laboratory.

     

    Conditions not covered by the warranty:

    Exposure to excessive heat (above 65 °C)

    Damage caused by melting the cabinet

    Damage caused on the sphere

    Damage caused by breakage of the WT, DT and TG rods

    Damage caused by misuse

    Opening the instrument without authorization (Breach of the seal)