Brand: CrifferModel:Vibrate Reference: Vibrate
Vibration dosimeter for WBV (whole body vibration) and HAV ( hand-arm vibration). Manufactured in Brazil, Vibrate meets national and international occupational hygiene standards. CrifferSuite software provides the necessary results for preparation of reports, studies and expertise through the report such as AREN, Crest Factor (FC) and resulting vibration dose value.
ISO-8041 (2005) Human response to vibration -- Measuring instrumentation
ISO-5349-1 (2001) Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration –General requirements
ISO-5349-2 (2001) Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 2: Practical guidance for measurement at the workplace
ISO-2631-1 (1997) Evaluation of human exposure to whole-body vibration — Part 1: General requirements
Display: High contrast backlit LCD screen
Simultaneous vibration measurements on the 3 axes: X, Y and Z
Whole body vibration measurements with triaxial seat accelerometer
Hand-arm vibration measurements with triaxial accelerometer and adapters
WBV Frequency weighting: Wk and Wd
HAV Frequency weighting: Wh
Measurement parameters: RMS, VDV, Aeq, Am, Amr, Amep, Are, Aren, A (8), Arep and Crest Factor
Calibration through sensitivity or with external calibrator
Storage: up to 60 measurements (20k records)
Data logging intervals: 1 to 60s
Operation temperature: 0 to 70 ºC
Operation Humidity: 0 to 95% RH
High resistance to EMI/RFI
Power Supply: rechargeable li-ion battery
Battery Life: 10h
Charger: bi-volt with USB connection
Dimensions: 90 x 62 x 24 mm
Weight: 125 g
HAV accelerometer accessories (T, bar and block adapters)
Leave your comment here
We guarantee our customers, for the period of 3 (three) years after the issuance of the invoice, technical assistance services for any defects caused by manufacturing or component failure that makes them inappropriate for the use they are intended.
To validate the guarantee, it is necessary to send the instrument properly packed, including a copy of the invoice to: Av. Theodomiro Porto da Fonseca, 3101 / Unit 6, São Leopoldo / RS CEP: 93022-715 OR TO AN AUTHORIZED DISTRIBUTOR..
The period for repairing of the product will not exceed 10 working days, counted from the date of receipt in our laboratory.
Conditions not covered by the warranty:
Exposure to excessive heat (above 65 °C)
Damage caused by impact.
Damage caused by stretching the HAV or WBV accelerometer cables
Damage caused from falling or breaking on the display
Opening the instrument without authorization (Breach of the seal)