X-01 Sensor Flex - Indoor air quality

X-01 Sensor Flex - Indoor air quality
X-01 Sensor Flex - Indoor air quality
Code: 365

Brand: CrifferModel:Criffer Reference: X-01 Launch Date: 31/01/2020


Notify me when available


X-01 is a sensor for indoor air quality assessments. It’s used to analyze environments with little natural ventilation, temperature and humidity without adequate control that can cause discomfort to certain groups of people. *FLEX displays instantaneous air quality index readings and minimum, average and maximum concentrations. CrifferSuite software allows reports and graphs generation. The X-01 sensor for IAQ assessments is in accordance with the review studies of the World Health Organization (WHO) guide values for air pollutants.

*Flex is supplied separately.

OBS.: It’s necessary to purchase the Flex to use it in conjunction with the probe.

Technical Information


Multifunction sensor


Resolution: 0,01


Operation temperature: -40 to 70 ºC


Operation humidity: 0 to 95 % RH


Atmospheric pressure: 300 to 1.100 hPa


Instantaneous reading of IAQ index


Maximum, Average and minimum readings: IAQ index, temperature, humidity and atmospheric pressure


Low power consumption 


RJ-09 Conector


Dimensions: 20 x 47 x 81 mm


Weight: 39 g

When purchasing the X-01 sensor, there are no items included.

Leave your comment here

- Max of 512 caracteres.

Click to Rate

  • Rate:
Login and leave your comment


    We guarantee our customers, for the period of 3 (three) years after the issuance of the invoice, technical assistance services for any defects caused by manufacturing or component failure that makes them inappropriate for the use they are intended.


    To validate the guarantee, it is necessary to send the instrument properly packed, including a copy of the invoice to: Av. Theodomiro Porto da Fonseca, 3101 / Unit 6, São Leopoldo / RS CEP: 93022-715 OR TO AN AUTHORIZED DISTRIBUTOR..


    The period for repairing of the product will not exceed 10 working days, counted from the date of receipt in our laboratory.


    Conditions not covered by the warranty:

    Exposure to excessive heat (above 65 °C)

    Damage caused by impact

    Opening the instrument without authorization (Breach of the seal)