Single-gas sensor for monitoring carbon monoxide concentrations. In conjunction with *Flex, it’s possible to storage CO concentrations assessments and also monitoring temperature and relative humidity. With instant readings for TWA and STEL, Flex displays the minimum, average and maximum concentrations. The instrument is compatible with the CrifferSuite software that allows you to generate reports with graphs. Meets NIOSH 6604 method for direct reading from 2006.
*Flex is supplied separately.
OBS.: It’s necessary to purchase the Flex to use it in conjunction with the probe.
Range: 0 to 1.000 ppm
Resolution: 1 ppm
Operation temperature: -40 to 70 ºC
Operation humidity: 0 to 95% RH
Automatically calculates TWA and STEL
Low power consumption
RJ 09 connector
Dimensions: 20 x 47 x 81 mm
Weight: 39 g
Leave your comment here
We guarantee our customers, for the period of 3 (three) years after the issuance of the invoice, technical assistance services for any defects caused by manufacturing or component failure that makes them inappropriate for the use they are intended.
To validate the guarantee, it is necessary to send the instrument properly packed, including a copy of the invoice to: Av. Theodomiro Porto da Fonseca, 3101 / Unit 6, São Leopoldo / RS CEP: 93022-715 OR TO AN AUTHORIZED DISTRIBUTOR..
The period for repairing of the product will not exceed 10 working days, counted from the date of receipt in our laboratory.
Conditions not covered by the warranty:
Exposure to excessive heat (above 65 °C)
Damage caused by impact
Damage caused by overexposure or exceeding the limits supported
Opening the instrument without authorization (Breach of the seal)