X-08 Sensor Flex - Illuminance Meter

X-08 Sensor Flex - Illuminance Meter
X-08 Sensor Flex - Illuminance Meter
Code: 371

Brand: CrifferModel:X-08 Reference: X-08

 

 

 


X-08

Sensor for illumination of internal and external environments, the X-08 probe has a tilt sensor to aid parallel positioning to the light source, which can vary between natural and artificial sources. Using *FLEX, the type of light source can be selected from the following options: solar, incandescent, fluorescent, LED, optical fiber, discharge, halogen and neon. With instant readings they display the minimum, average and maximum values in addition to generating the report and graphs of the evaluations. Light and with an ergonomic design, this equipment meets the requirements of the evaluation methods.


*Flex is supplied separately.
OBS.: It’s necessary to purchase the Flex to use it in conjunction with the probe.


 

Technical Information

Range: 0 to 100.000 lux

Operation temperature: 0 a 65 °C

Operation humidity: up to 95%

4 readings per second

Operation range: 400 nm to 700 nm

Selection of light source (solar, incandescent, fluorescent, LED, optical fiber, discharge, halogen and neon)

Displays the probe tilt angle

Low power consumption 

RJ 09 connector

Dimensions: 20 x 47 x 81 mm

Weight: 37 g

 
When purchasing the X-08 sensor, there are no items included.

Leave your comment here







- Max of 512 caracteres.

Click to Rate


  • Rate:
Send
Login and leave your comment

Features



     

    We guarantee our customers, for the period of 3 (three) years after the issuance of the invoice, technical assistance services for any defects caused by manufacturing or component failure that makes them inappropriate for the use they are intended.

     

    To validate the guarantee, it is necessary to send the instrument properly packed, including a copy of the invoice to: Av. Theodomiro Porto da Fonseca, 3101 / Unit 6, São Leopoldo / RS CEP: 93022-715 OR TO AN AUTHORIZED DISTRIBUTOR..

     

    The period for repairing of the product will not exceed 10 working days, counted from the date of receipt in our laboratory.

     

    Conditions not covered by the warranty:

    Exposure to excessive heat (above 65 °C)

    Damage caused by impact.

    Opening the instrument without authorization (Breach of the seal)